FLOWX E-mail sales@flowxvalve.com

FLOWX Engineer 86-21-54150349

News

Home >> News >> Industry dynamics >> The Influence Factors of the Conventional Valve Lifespan

The Influence Factors of the Conventional Valve Lifespan

Source:http://www.flowxgroup.comUpdate Time:2014-11-04Hits:

The conventional valve is a kind of necessary element inside of pneumatic actuator and its function is to control the current passing through. However, after being corroded for a long period, the conventional valves are bound to have something wrong. Therefore, it is necessary to figure out some ways to prolong the pneumatic actuators lifespan.

The first thing to prolong conventional valve lifespan is to pay attention to the daily maintenance. Before using conventional valve, it is possible to check whether the elements of conventional valve are perfect. In addition, it is possible to inspect whether the sealing ring is complete or not. In addition, leakage phenomenon is so common that it is possible to pay attention to it. If there are any damaged components, replace them immediately so as not to have an influence on the performance of the conventional valve.

Another way to prolong conventional valve lifespan is to use the conventional valve according to the regulation. For example, it is possible to use conventional valve under rated pressure and power supply, or it is possible to damage the conventional valve. In addition, stop the conventional valve for a little white to have a rest. At this time, it is necessary to stop all valves. And before using conventional valve, it is possible to carry out test run so as to make clear the performance of the conventional valve and whether there is anything wrong of the conventional valves.

What’s more, it is necessary to inspect the conventional valve after finishing using it, which is another effective way to prolong conventional valve lifespan. After using it, it is possible to inspect whether there are any damaged elements or any scratches on it. And after making sure to close all valves, it is possible to clean the conventional valve carefully. If the conventional valves are used to connect pipes to transmit oil, the accumulated dust is going to form impurities, which is able to have an effect on the quality of the transmitted oil.

Apart from the regular maintenance, it is possible to pay attention to the regular lube of the electric actuators. After a long period of washing, it is easy for conventional valves to be corroded. Therefore, it is necessary to use corrosion coverage to prevent the conventional valve from being corroded, which is another effective method to prolong conventional valve lifespan. In the middle of maintaining the conventional valve, it is probably to make sure the existence of the protection covering. The regulated replacement period of conventional valve is six months. Therefore, it is necessary to replace the components of conventional valves regularly so as to make sure the normal running of the conventional valve. Components in good condition are able to make sure the stable operation of the conventional valve.

Featured Products: pneumatic actuator control | FLOWX Pneumatic actuator

Customer Hotline:
021-54150349