The Way to Test the Upflow Furnace Vent Limit Switch

FLOWX E-mail

FLOWX Engineer 86-21-54150349


Home >> News >> Industry dynamics >> The Way to Test the Upflow Furnace Vent Limit Switch

The Way to Test the Upflow Furnace Vent Limit Switch

Source: Time:2014-03-18Hits:

All furnaces, such as an upflow furnace limit swith , have constructed-in security gadgets referred to as restrict switches. The upflow wide variety of furnaces vent limit switches are named for their capability to suck in awesome oxygen and then cozy the exact same oxygen to heat a home. The vent restrict change (or higher temperatures restrict change) manages when the blower and burner come on and shut away to keep aside from overheating the vents, ducts and other portions of the heating program. Screening the change needs an infrared thermometer in pneumatic actuators .

Eliminate the doorway of the furnace to entry the within. The doorway should really slide away very easily. Discover the vent restrict change box. It should really be a fist-sized box with a black or metallic covering and a light change. Open the covering of the box by pulling up on the bottom portion of the cover. Draw the cover up out of the way so you can see within.

Established the 3 temperatures gauges to the correct settings. Set the left arm at close to 90 degrees, the center at 120 to 130 degrees and the last one on the proper at 200 to 210 degrees Fahrenheit. The 1st two manage the buff (or blower) and the last one tells the burner when to shut away to avoid overheating the vents and duct work.

Draw the change out to set the buff on automated. Close the cover to the vent restrict change and repoint the doorway to the furnace. Listen for the furnace to come on and maintain the infrared thermometer 6 inches aside from a vent to check the temperatures. Soon after the furnace warms up and then shuts affordable, pull the thermometer aside from the vent and be aware the temperatures examining. If the examining is properly beneath the last setting on the vent restrict change, the furnace and change are working correctly.

Hold the infrared thermometer in top of the vent for the length of the time the furnace and blower remain on to get an correct examining. In "HVAC immediate solutions," Peter Curtiss warns that, "a malfunctioning vent restrict change could lead to a furnace to over-heat and possibly melt ducts and vents."

Featured Products: electric actuators | keystone pneumatic actuator

Customer Hotline: